Several Factors Should Be Considered When Choose Network Adapters

Blog

Several Factors Should Be Considered When Choose Network Adapters

Whether choose the current Network Adapters and install it properly are the necessary conditions of connecting to the network whne you assembly the computer. In general, we may consider the following factors when we choose the network adapters:

1.Network Type: There are Ethernet, Token Ring, FDDI net, we should conside the type of network when we choose corresponding network adapters.

2.Transfer rate: select the network adapter's transmission rate according to the server or workstation in accordance with the bandwidth requirement and the physical transmission medium which can provide the maximum transfer rate. To Ethernet for example, we can choose a rate of 10Mbps, 10/100Mbps, 1000Mbps, and even 10Gbps and other appropriate rate. Remember that the higher rate of Network Adapters is not the best.

3.The cable interface Network adapters supports: the network adapters will eventually connect to the network, so there must be an interface to cable through its connection with other computer network equipment. Different network interfaces are suitable for different network types. Now the main Ethernet interface is RJ45 network adapter, the thin coaxial cable interface and coarse coaxial BNC AUI interfaces, FDDI interfaces, ATM interfaces. In order to apply to a wider range of application environments, some network adapter sprovide two or more types of interfaces, such as the network adapters will also provide RJ45, BNC interface or AUI interfaces.

4.RJ45 interface: This is the common type of network adapters which is widely used of network adapter. RJ45 network adapters are benfits driven by the popularity of twisted pair Ethernet applications. RJ45 interface. Because this type of RJ45 network adapteris used with twisted-pair Ethernet as the transmission medium, the interface of RJ45 network adapter is similar to the common telephone interface RJ11, but the RJ45 is 8 core cable while the telephone line interface is a 4-core which only take two core wire (ISDN phone line then 4 core). There are two lights state instructions on the network adapters, through the two lights color, we could judge the working status of the network adapters.

5.Price and brand: the price of different rates, different brands of network adapter sdifferences are different.

Pre Page: Introduction of Patch Panels Next Page: The Capacity of Ethernet Network Adapter

Product (455)

Blog 2 (10)

Blog (30)

Quality Control (1)

Service (1)

My Company website (1)

Credit Report

Products Index

Company Info

Blog